Kenwood XD-980MD - Manual (Page 69)

XD-980MD (En)
6 9
Preparation section
Basic
section
Application section
Knowledge sections
Adjust the clock before setting the timer.
Timer operation
Timer operation
Operate easy To use Timer (O.T.T.)
Playback of the selected input source starts at the specified time, and the unit is switched off after one hour. This timer operates
only once directly after setting.
Sleep timer (SLEEP)
The unit is turned OFF automatically after the specified period has elapsed.
Timer playback, timer recording (PROG.1, PROG.2)
With each of the two timer programs, a selected source can be played (or radio broadcast can be recorded) in the previously set
time period.
AI timer playback (PROG.1, PROG.2)
Operate easy To use Timer (O.T.T.)
Timer playback is possible simply by setting the time.
The source selected last before the unit was switched off
will be played. One hour after start of timer playback, the
unit will be switched off automatically.
1Select the source to be played.
2Switch OFF the unit supply.
3Press the MODE key.
4Set the ON time.
5Press the ENTER key.
The time is
returned. The time is
advanced.
÷
When the MODE key is pressed, the input source and the ON
time are displayed.
÷ The ON time can be set in steps of 5 minutes.
Press the MODE key twice while the unit is OFF.
To cancel
ON time display
Sleep timer
Set the number of minutes after which the unit is to be
turned OFF.
1Turn the unit ON.
2Set the time.
Turn the unit OFF or press the SLEEP key until the sleep
time is cancelled.
To cancel
÷ The unit is turned OFF automatically after the set time has
elapsed.
÷
Each press decreases the time by 10 minutes. The maximum
time that can be set is 90 minutes.
90 =80=70...30=20=10=Cancel=90=80...
Duration for sleep timer
Lights
The MD operates on the basis of the information read
from the disk into memory.
Before timer setting with the MD, leave the unit ON for
10 min. or more to make the memory backup function
effective.
k
Note Note
Each press switches the modes as follows.
1 “O.T.T.” lit........... The timer is used.
2 “O.T.T.” not lit.... The timer is not used.
The volume increases gradually after start of timer playback.
The program timer does not operate until the end of
operation of the O.T.T. timer.
MODE
ENTER
SLEEP
A M 7 ) ) :
O.T.T.
TUNED STEREO
AUTO SLEEP
ECHO
SLEEP EQ.
CLASSIC
MANUAL
POP ROCK
VOL.
SLEEP
s L E E P 9 )
EX . BASS
D
O W
N
UP MULTI CONTROL
/VOLUME