Kenwood XD-980MD - Manual (Page 43)

XD-980MD (En)
4 3
Preparation section
Basic
section
Application section
Knowledge sections
Convenient Recording Methods
One-touch recording of one CD, MD
(one-touch edit recording of all tracks)
r
All tracks of one CD or MD are recorded. Recording is possible
to tape or MD from CD and to tape from MD.
A
Tracks at the tape reversal or the tape end
remain as they are.
For recording to tape
1 2 3
5 6
4
8 4 7
Fade-in/fade-out
Fade-out : Ending a tune by gradually decreasing the volume.
Fade-in
: Starting a tune by gradually increasing the volume.
Volume decreases
gradually. Volume increases
gradually.
Fade-out Fade-in
Side A
Side B
B
C
Recording in the programmed sequence from CD
to MD.
When a desired track is found, only that track is
recorded
(One-touch edit recording of one track)
t
While listening to a CD or MD, it is possible to record only the
track being heard at that time from the beginning of that track.
Recording is possible to tape or MD from CD and to tape from
MD. This is convenient for recording of desired tracks from a
disc being heard for the first time.
From one CD
3 5
4 6 8 7
1 2 1 2 3
4 5 6
4
7
Selected tracks are recorded from several
CDs to MD.
From 2 or more CDs
E
Side A
Side B Side B
The tune interrupted in the middle at the
end of tape side B is simply faded out.
Change of the track sequence according to the
tape length
(CD =TAPE only) (Time edit recording) p
The order of CD tracks are changed automati-
cally so that no tune is interrupted at the end
of tape sides A and B. (Up to 32 tracks)
F
Fade-out/Fade-in at the tape reversal
(CD =TAPE only) (Fade edit recording) W
CD tracks are recorded in the order they are
recorded. The tune interrupted at the end of
tape side A is faded out and side B starts with
fading in from the middle of that tune.
Side A
What is CCRS?
(only cassette deck (option))
This is a function for one-touch recording of a CD onto tape.
When the CCRS key is pressed, the CD contents and the charac-
teristics of the tape to be used are checked for about 60 sec.
(depending on the CD contents), the recording level is set auto-
matically, and recording starts. At the end of the recording, stop
is executed automatically.
The setting is cancelled when the unit is switched OFF or the
CD is stopped.
D
Recording of one CD or several CDs
(CD =MD) (Program recording) i
Recording in the programmed sequence from
CD to tape.
From one CD
Selected tracks are recorded from
several CDs to tape.
From 2 or more CDs
Recording of one CD or several CDs
(CD =TAPE) (Program recording) o
...............................................
..................................
Producing a MD collecting only the first titles
(BEST HITS function)
y
The first tracks of all set CDs are recorded in sequence on MD.
Producing a tape collecting only the first titles
(BEST HITS function)
u
The first tracks of all set CDs are recorded in sequence on
tape.