Kenwood XD-980MD - Manual (Page 45)

XD-980MD (En)
4 5
Preparation section
Basic
section
Application section
Knowledge sections
Convenient Recording Methods
1
Make the preparations for recording.
2
When a desired track is found, only that track is recorded
(One-touch edit recording of one track)
While listening to a CD or MD, it is possible to record only the track being heard at that time from the beginning of that track.
Recording is possible to tape or MD from CD and to tape from MD.
For recording to tape, please read “Let's record” in the operation manual of the cassette deck (option) carefully.
Playback of a CD or MD.
÷ Recording and playback will be stopped.
To interrupt a recording
3
Press the O.T.E. key during playback of a track to be recorded.
CD
=MD
MD
=TAPE
CD
=TAPE
Press during playback. Press during playback. Press during playback.
÷
Return is made to the beginning of the track being played and
recording starts.
At the end of the recording
MD recorder : Stop.
Cassette deck : Stop is executed after an unrecorded portion of
about 4 sec. has been produced.
To record another track ... repeat the steps 2 and 3.
MD
=TAPE
1Load a tape.
2Select the tape transport direction.
( 2 or 3)
3Select “p”. (two-side recording)
4Select the Dolby NR mode.
5Select MD with the INPUT key.
6Insert disc(s) in the MD recorder.
)
7Adjust the recording level.
CD
=MD
1Insert a recordable disc into the MD
recorder.
2Select CD with the INPUT key.
3Insert disc(s) in the CD player.
*
CD
=TAPE
1Load a tape.
2Select the tape transport direction.
( 2 or 3)
3Select “p”. (two-side recording)
4Select the Dolby NR mode.
5Select CD with the INPUT key.
6Insert disc(s) in the CD player.
*
7Adjust the recording level.
MD
=TAPE
CD
=MD
7 7 7
CD
=TAPE
MD TAPE CD TAPE
O.T.E.
When equalizer, SRS 3D, or any other effect is applied
to the sound, the sound with applied effect can be re-
corded (except for digital recording from CD to MD).
´ˇ