Kenwood XD-980MD - Manual (Page 58)

XD-980MD (En)
5 8
Preparation section
Basic section
Application section
Knowledge sections
MD Edit Functions
Dividing a track
(TRACK DIVIDE)
Use the following procedure to divide a track into two by
inserting a track number in its middle. For example, by in-
serting an additional track number before the passage you
are specially fond of, it is easy to skip to there when you
play the disc later. Note that the track numbers of the tracks
located after the divided track are automatically
incremented.
After editing, eject and remove the mini disc.
Play the track to be divided.
2
4
Press the TRACK EDIT key at the desired position.
1
1Select “DIVIDE”.
3
Execute the track divide operation.
“WRITING” displayed during the mini disc ejection opera-
tion indicates that the data associated with recording or
editing is being written on the disc. Do not apply vibration
or shock to the unit while this message is displayed.
Each press switches the operation.
1 DIVIDE ? (Dividing a track)
2 COMBINE ? (Combining tracks)
3 ERASE ? (Erasing one track)
4 Editing cancelled
÷ This operation is also possible during play-pause.
÷
The track is divided into two tracks.
÷ Playback starts from the track made from the second half of the
divided track.
÷ There is no blank space left between the two tracks.
÷
When the track to be split has a title, the two tracks will have
the same title.
Should be approx. 2 sec. or longer.
Track number is
incremented.
Divided track (first half)
Divided track (second half)
Up to 255 track numbers can be inserted additionally by repeat-
ing
1 to 3 for each of them.
( − dB)
0 0 1 < > 0 0 2 ?
R
L ∞
3 0 1 30 10 5
( − dB)
D I V I D E ?
R
L ∞
3 0 1 30 10 5
( − dB)
C O M P L E T E !
R
L ∞
3 0 1 30 10 5
A B C
1 2 3
A B C
1 2 4 3
TRACK EDIT
E
N
T
E
R
2Set it.
S
E
T
÷
Editing is aborted if no operation has been performed for 8
seconds.