Producing a tape collecting only the first titles, C d ) 1, C d ) 1 1 5 ) – Kenwood XD-980MD User Manual
Page 47: Best hits function), Exchange discs as required
XD-980MD (En)
4 7
Preparation section
Basic
section
Application section
Knowledge sections
Convenient Recording Methods
When the discs are exchanged sequentially, recording can
be continued without interruptions.
÷
Recording and playback are stopped.
÷
Recording and playback are also stopped when the
7 key of
the CD player is pressed.
Make the preparations for recording.
Confirm that the “PGM” indicator is not lit.
Press the BEST HITS key.
1
2
3
Press in stop mode.
Producing a tape collecting only the first titles
(BEST HITS Function)
The first tracks of all set CDs will be recorded on tape in sequence.
During recording of the third disc, the already recorded discs can be exchanged. This is convenient for collecting from a
large number of single CDs.
Please read “Let's record” in the operation manual of the cassette deck (option) carefully.
P. MODE
DISC SELECTOR
DISC
1
DISC
2
DISC
3
1Select the disc for start of re-
cording.
2Press the BEST HITS key.
Exchange discs as required.
4
The tray opens automatically.
1Exchange the (two) discs.
2Close the tray.
0
OPEN/CLOSE
To stop recording
÷
When recording from the third disc starts, the tray opens
automatically. The two already recorded discs can be ex-
changed.
÷
Recording ends when the tape end (one side or both sides) is
reached.
Goes off
1Load a tape.
2Select the tape transport direction. (2 or 3)
3Select “p”. (two-side recording)
4Select the Dolby NR mode.
5Select CD with the INPUT key.
6Insert disc(s) in the CD player.
*
7Adjust the recording level.
BEST HITS
C D ) 1
@
) ) )
EX
.
BASS
:
1
2
3
RUNNING
EQ.
CLASSIC
MANUAL
POP
ROCK
VOL.
6
7
1
2
3
4
5
PGM
INTRO
C D ) 1
1 5 )
EX
.
BASS
:
1
2
3
RUNNING
INDICATOR
EQ.
CLASSIC
MANUAL
POP
ROCK
VOL.
6
7
8
1
2
3
4
5
With recording onto tape, the track will be inter-
rupted for the part of the guide tape at the tape re-
versal, where recording is not possible. Please use a
different recording method if this is to be avoided.
When equalizer, SRS 3D, or any other effect is applied
to the sound, the sound with applied effect can be re-
corded.
´ˇ
7