Kenwood XD-980MD - Manual (Page 56)

XD-980MD (En)
5 6
Preparation section
Basic section
Application section
Knowledge sections
MD Edit Functions
Moving several tracks at a time
(QUICK MOVE)
Use the following procedure to change the current order
of tracks by selecting a desired order and moving the tracks
together.
Please execute operation in stopped condition.
Execute the track move operation.
Press the QUICK MOVE key.
2
4
Select the range of tracks to be reordered.
÷
Pressing the 8 8 8 8 8 (Q.MOVE CLEAR) key allows to cancel the last
selected track only. (To cancel other previously selected tracks,
abort editing and restart from the beginning.)
÷
Pressing the ¶ ¶¶ ¶¶ REC (Q.MOVE CHECK) key allows to check the
current order of tracks.
÷ It takes a while until the execution completes.
÷
If the ENTER key is pressed before reordering all tracks, the
tracks which have not been selected are added to the end of the
reordered range in the same order as before.
÷
You can suspend track reordering by pressing the eject ( 0) key
or the ON/STANDBY key while “COMPLETE” is flashing.
1
1Select the first track in the reordered
range.
20 continuous tracks within the specified range can be reordered
at a time.
3
Select tracks numbers in the desired order.
Repeat steps 1 and 2 until all tracks have
been arranged in the desired order.
5
After editing, eject and remove the mini disc.
“WRITING” displayed during the minidisc ejection opera-
tion indicates that the data associated with recording or
editing is being written on the disc. Do not apply vibration
or shock to the unit while this message is displayed.
2Set the reordered range.
2Set it.
E
N
T
E
R
1Select a track number.
Selected track No.
( − dB)
C O M P L E T E !
R
L ∞
3 0 1 30 10 5
S
E
T
S
E
T
-
4
CH ARACTER
¢
+
To increase
track No.
-
4
CH ARACTER
¢
+ To decrease
track No.
QUICK
MOVE
22 23 24 25 26 27 28 1 2 3 4 5 6 7
( − dB)
0 0 5 0 0 5 @ - -
R
L ∞
3 0 1 30 10 5
( − dB)
0 0 5 0 2 4
R
L ∞
3 0 1 30 10 5
The names in brackets in the explanations are the names of the
remote control keys.
S
E
T
( − dB)
Q . M O V E ?
R
L ∞
3 0 1 30 10 5
( − dB)
0 0 1 0 2 0
R
L ∞
3 0 1 30 10 5
÷ Editing is ended when no action is taken for 8 seconds.
To decrease
track No. To increase
track No.
Moving the present track No. 7 to track No. 5
Target track No. Track No. to be moved
Scrolling after
flashing
20 tracks
(changed range)
Track No.
Select the first track in the 20-track range.
1Press the QUICK
MOVE key.
2Set it.
To abort operation, press the QUICK MOVE key again.
( − dB)
0 0 5 0 0 7 @ A B
R
L ∞
3 0 1 30 10 5
( − dB)
0 0 6 0 0 8 @ A B
R
L ∞
3 0 1 30 10 5