Enjoying sound field effects, Experiencing srs 3d stereo, S r s 3 d o n – Kenwood XD-980MD User Manual
Page 65: Sound retrieval system), 2 adjust the effect strength (level)
XD-980MD (En)
6 5
Preparation section
Basic
section
Application section
Knowledge sections
Effective Sound Field and Sound Quality Adjustment
1Switch on SRS 3D.
Enjoying Sound Field Effects
The Sound Retrieval System is an epochal system which produces a three-dimensional sound space by applying the most
suitable processing to the sound signal on the basis of the human listening mechanism. This permits real depth and sound
location, considered as difficult to realize with conventional 2-channel stereo (general stereo). A sufficient effect can be
obtained for any source (CD, MD, broadcasts, etc.). Recording with applied SRS 3D stereo also is possible.
Experiencing SRS 3D Stereo
(Sound Retrieval System)
Each press switches the modes as follows.
1 Strength of the SRS 3D stereo effect (LEVEL)
2 Left and right volume balance
3 MD recording level (REC)
4 Volume (INPUT) from the external equipment connected
to the AUX terminal
5 Normal volume adjustment (VOL)
÷
Adjustment is possible in the range from -10 to +10.
÷
Please set as desired according to the titles being played back
etc.
÷
“REC” is displayed only when the REC INPUT is analog.
•
÷
“INPUT” is displayed only with AUX.
÷
SRS 3D stereo ON/OFF switching is not possible during record-
ing.
Adjust the strength of the effect.
The level
decreases.
2Adjust the effect strength (level).
”LEVEL“ will be displayed.
The level increases.
SRS 3D
s R s 3 D O N
1
2
3
RUNNING
INDICATOR
EQ.
CLASSIC
MANUAL
POP
ROCK
VOL.
6
7
8
9
10
11
1
2
3
4
5
SRS 3D
ON/OFF is switched each time the
key is pressed.
MODE
L E V E L + 1 )
EQ. ON
1
2
3
EQ.
CLASSIC
MANUAL
POP
ROCK
VOL.
6
3
4
5
Level display
D
O
W
N
UP
MULTI CONTROL
/VOLUME
Lights