Kenwood XD-980MD - Manual (Page 61)

XD-980MD (En)
6 1
Preparation section
Basic
section
Application section
Knowledge sections
MD Edit Functions
“WRITING” displayed during the mini disc ejection opera-
tion indicates that the data associated with recording or
editing is being written on the disc. Do not apply vibration
or shock to the unit while this message is displayed.
÷
If it is required to erase only the first or second half of a track,
only one TRACK DIVIDE operation is enough.
Erasing a part of a track
1Turn the part to be erased into one
track.
Use the TRACK DIVIDE function to
turn the part you want to erase into
one track.
1 Turn the part to be erased into one track by using the TRACK DIVIDE function.
2 Erase it by using the TRACK ERASE function.
Use the following procedure to erase the desired part of a track.
Should be approx. 2 sec. or longer.
Should be approx. 2 sec. or longer.
The part divided with TRACK DIVIDE
becomes one “track”.
Execute TRACK
DIVIDE twice.
Part to be erased
TRACK DIVIDE
I
The space left after erasing is filled by sub-
sequent tracks which move along.
Part to be erased
Track No. is
adjusted.
Execute TRACK ERASE
once.
TRACK ERASE
P
2Erase the part to be erased.
3After editing, eject and remove the
mini disc.
Use the TRACK ERASE function to
erase the “track” (part you want to
erase) made in step
1.
A B C
1 2 5
A B
1 2 3
C
3 4
A B C
1 2 5 3 4
A B C
1 2 4 3
4
After editing, eject and remove the mini disc.
“WRITING” displayed during the mini disc ejection opera-
tion indicates that the data associated with recording or
editing is being written on the disc. Do not apply vibration
or shock to the unit while this message is displayed.
Image of erasing one track
(TRACK ERASE)
A B D
1 2 4 3
C A B
1 2 3
D
Track to be erased
Track Nos. are adjusted.