Konica Minolta IP-711 - Manual (Page 78)

7. Settings and Operations for Scan Functions
69
7.3 Scan to FTP Server
Scan to FTP Server is the function that transmits image data scanned by the copier
to the FTP server.
1. Using Network Management Utility Light, register the FTP servers (up to five).
☞p.70
2. Using Network Management Utility Light, make the setting for One-Touch Key
Registration or One Time Registration.
The destination, FTP server and URL Notification E-mail Address can be set on
the One-Touch Key Registration screen, and the destination, FTP server, URL
Notification E-mail Address, and other scan mode functions can be set on the
One Time Registration screen. ☞p.110
3. On the copier control panel, specify the destination to which the scanned data is
to be transmitted.
The destination is set by selecting the key, in which One-Touch Key Registration
or One Time Registration has been made in step 2. ☞p.74
4. On the copier control panel, specify the document scan mode.
MEMO
Even if URL Notification has not been set during One-Touch Key Registration or
One Time Registration on Network Management Utility Light, it is possible to
specify the URL Notification party from the copier control panel.☞p.76
4334O002AA
PC
Scan data
Information
Mail server FTP server Mail server