Konica Minolta IP-711 - Manual (Page 144)

9. Troubleshooting
135
Symptom Possible Cause Action
Unable to specify
Punch. Hole Punch cannot be
specified together with
Booklet, OHP, Thick2,
and/or Thick3. Check the setting for each
item of the printer driver.
Unable to effect
Punch. Printed pages can at times
be fed out without being
punched if the direction of
the paper loaded in the
paper source is not correct. Check the setting for
Orientation.
The hole punch
position is not what is
expected. Orientation setting is not
correct. Check the punch position on
“Page Layout” of a printer
driver property sheet.
Unable to specify
Folding. FS-231 is necessary for
Folding. FS-231 must be
selected on “Device
Option.” Specify FS-231 for “Device
Option.”
Folding cannot be
specified together with
Staple and/or Thick. Check the setting for each
item of the printer driver.
Unable to print image
properly. Memory space available is
not sufficient. Simplify the image to reduce
the volume of data
manipulated.
Paper is not fed from
the specified paper
source. Paper will not be fed from
the specified paper source
if that paper source is
loaded with paper of a
different size and
direction. Load the paper source with
paper of the appropriate size
and in the appropriate
direction.