Konica Minolta IP-711 - Manual (Page 112)

7. Settings and Operations for Scan Functions
103
■ Specifying the Document
Set the type of the document to be scanned.
1. Press the Scan key on the copier.
2. Select the “Document Set” tab.
3. Set the following items.
Original Direction : Set the placement direction of the document.
Setting values : Not selected (Auto detect), Portrait documents
“Place Horizontally,” “Place vertically,” Landscape
documents “Place Horizontally,” “Place Vertically.”
Doc. Mode : Set the document mode.
Setting values : 1, 2, Book
Mixed Original Detection : For scanning different sized documents, select
“Mixed Original Detection” key.
Separate Scan : When Separate Scan is selected, the data read by
the time “Finish” key displayed on the copier
control panel after scanning completion is selected
are dealt as a job.
■ Setting Checks
1. Select the “CHECK” key.
When the “Send” tab is selected, the settings made for Internet Fax can be
checked.
When the “Detail” key is selected, the list of registered e-mail address will then
appear.
When the “Set” key is selected, it can select and add “Reply-To address” from
the one-touch key.
k4334P211CA