Konica Minolta IP-711 - Manual (Page 56)

6. Printing
47
6.1 Device Option Setting
Options installed on the copier are enabled from the printer driver.
Setting Procedure
1. Start the printer driver and select the “Device Option Setting” tab.
2. From the “Installable Options” list, select the device to be installed and click the
“Add” button.
Check that the selected option is now shown under the “Installed Options” list.
6.2 Using Easy Set
The current setting value can be saved under a name you specify.
Calling up settings
Click the [ ▼ ] button in the combo box and choose the desired setting from the list.
Saving or deleting settings
The contents of each property sheet may be saved or deleted.
Clicking the “Save” button will open the Easy Set Name Box.
The current setting value can be saved under a name you specify.
k4334P249CA
4334P241CA