Konica Minolta IP-711 - Manual (Page 115)

7. Settings and Operations for Scan Functions
106
7.7 The Operation of Capturing Images by TWAIN
TWAIN is the interface that allows images captured by a specific device to be input
through a computer of a different platform. It is applied to control the scanner of
the copier so as to capture scanned images in applications. To use TWAIN, it is
necessary that a TWAIN driver be installed in the PC and TWAIN settings be made
on the copier. The function described in this step is valid only for use in network
environment.
Installing the TWAIN Driver
1. Open the location of the printer driver CD-ROM, in which the TWAIN driver is
stored.
2. Execute SETUP.EXE.
Controller Setting
Setting from Network Management Utility Light
1. Start Network Management Utility Light.
2. Enter the password and log on to the Administrator mode.
3. From the “Network” tab, select “TWAIN Configuration.”
4. Set the following items.
Operation Lock Time : Set the operation lock time of the control panel to
enable TWAIN operations from the PC.
Setting values : 30 to 300 sec.
k4334P180CA