Konica Minolta IP-711 - Manual (Page 147)

Appendixes
138
B. How to Use Network Management Utility Light
What is Network Management Utility Light?
Network Management Utility Light is a device management utility built into the
controller. From a PC on the network, start a Web browser and access Network
Management Utility Light. Then, controller settings can be changed.
System Requirements
Network
: Ethernet + TCP/IP protocol
Application : Web browser
Microsoft Internet Explorer version 5.5 or later (Java-compliant),
Netscape Communicator version 4.5 or later (Java-compliant)
Accessing Network Management Utility Light
Network Management Utility Light can be accessed directly using a Web browser.
1. Start the Web browser.
2. Type the IP address of the controller as follows in the address box and press the
Enter key.
http:///
E.g.: If the controller IP address is 172.16.0.100
http://172.16.0.100/
3. Network Management Utility Light will appear.