Konica Minolta IP-711 - Manual (Page 32)

4. Settings Required for Network Printing
23
4.5 Settings for Printing using IPP
Settings made on the controller side
If IPP (Internet Printing Protocol) is used, make the following settings on Network
Management Utility Light. (Printing can be done with the default settings.)
1. Start Network Management Utility Light.
2. Enter the password to log on to the Administrator mode.
3. Click the “Network” tab and then select “Common Setting” – “IPP.”
4. Make the following settings.
Enable IPP : Set the IPP function.
Setting values : Enable, Disable
Accept IPP Jobs : Set the IPP reception function.
Setting values : Enable, Disable
Printer URI : Displays the URL of the printer, with which data
can be printed using IPP.
Operational Supported : Specify the print operation supported by the IPP.
Setting values : Print Job, Validate Job, Cancel Job, Get Job
Attributes, Get Jobs, Get Printer Attributes
k4334P235CA