Konica Minolta IP-711 - Manual (Page 68)

6. Printing
59
6.11 Print to Suit the Paper Size
The image on the document created with an application can be enlarged or reduced
when printing according to the paper size.
Setting Procedure
1. Select the “Paper” tab.
2. Check that “Original Document Size” represents the size of the document
created with the application.
3. For “Output Paper Size,” specify the size of the output paper.
4. If “Fit to Paper” is selected, the copier prints the image on the document to fit
nicely to the paper size selected for use.
NOTES
Make sure that the paper of the size set in “Output Paper Size” is loaded in the
copier.
Print data Printout
1149O004AA