Combination instrument - time, Setting the clock, Combination instrument - time setting the clock – KTM 690 ENDURO EU User Manual
Page 31: Operating elements
OPERATING ELEMENTS
29
700120-01
– Switch on the ignition by turning the ignition key in the position .
– Press the MODE button several times until the ODO display mode is active.
– Keep the MODE button pressed until the display mode changes from Km/h to Mph or
from
Mph to Km/h.
Specification
Activation duration of
MODE button
10 s
5.20
Combination instrument - time
700115-01
The time is shown in area
of the display.
Info
The time must be adjusted after the battery is disconnected or the fuse is changed.
5.21
Setting the clock
Condition
The motorcycle is standing.
This manual is related to the following products: