KTM 690 ENDURO EU - Manual (Page 94)

MAINTENANCE WORK ON CHASSIS AND ENGINE
92
100289-01
– Insert the brake pads, insert the bolt and mount the split pin.
– Operate the foot brake lever repeatedly until the brake linings lie on the brake disc and
there is a tight spot.
– Adjust the brake fluid level to the MAX mark.
Brake fluid DOT 4 / DOT 5.1 ( P. 166)
– Refit screw with membrane.
Info
Clean up overflowed or spilt brake fluid immediately with water.
9.40
Removing front wheel x
– Jack up the motorcycle. ( P. 56)
100261-01
– Press the brake caliper by hand on to the brake disc in order to press back the brake
pistons.