Fitting rear wheel x, Fitting rear wheel, Maintenance work on chassis and engine – KTM 690 ENDURO EU User Manual
Page 98
MAINTENANCE WORK ON CHASSIS AND ENGINE
96
9.43
Fitting rear wheel
x
Warning
Danger of accidents Reduced braking due to oil or grease on the brake discs.
– Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Danger of accidents No braking effect when operating the rear brake.
– After installing the rear wheel, always operate the footbrake until the pressure point is reached.
– Checking the rear hub rubber dampers.
x
100269-10
– Check parts for damage and wear. Replace damaged or worn parts.
– Remove the bushing
. Clean and grease the roll surfaces of the bushing and the shaft
seal ring
.
Long-life grease (
– Clean and grease the thread of the wheel spindle and nut
.
Long-life grease (
– Mount the rubber damper and rear sprocket carrier in the rear wheel.
– Place the rear wheel in the swingarm and bring the brake disc on the brake caliper into
contact.