KTM 690 ENDURO EU - Manual (Page 117)

MAINTENANCE WORK ON CHASSIS AND ENGINE
115
100296-10
– Position brake-hose guide  . Mount and tighten screws  .
Specification
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
9.58
Changing the headlight bulb
Note
Damage to reflector Keep the glass of the bulb free of grease.
– Clean the glass bulb with a clean cloth before mounting. Any grease on the glass will evaporate by the heat and be deposited on the
reflector.
– Remove the headlight mask with the headlight. ( P. 113)
600610-10
– Pull off connector  .
– Take off rubber cap  of the headlight bulb.