KTM 690 ENDURO EU - Manual (Page 118)

MAINTENANCE WORK ON CHASSIS AND ENGINE
116
600611-10
– Detach spring bar  .
– Remove headlight bulb
 .
– Insert a new headlight bulb into the headlight housing.
Headlight (H4/P43t) ( P. 158)
– Fit the headlight bulb in the headlight using the spring bar.
– Replace the rubber cap. Attach the connector.
– Refit the headlight mask with the headlight. (
P. 114)
9.59
Changing the parking light bulb
Note
Damage to reflector Keep the glass of the bulb free of grease.
– Clean the glass bulb with a clean cloth before mounting. Any grease on the glass will evaporate by the heat and be deposited on the
reflector.
– Remove the headlight mask with the headlight. ( P. 113)
600610-12
– Remove rubber cap  .