KTM 690 ENDURO EU - Manual (Page 150)

CLEANING
148
Warning
Danger of accidents Reduced braking due to wet or dirty brakes.
– Clean or dry dirty or wet brakes by riding and braking gently.
– After cleaning, ride the vehicle a short distance until the engine warms up, and then apply the brakes.
Info
The heat produced causes water at inaccessible positions in the engine and the brakes to evaporate.
– Push back the protection covers on the handlebar instruments to allow water to evaporate.
– After the motorcycle has cooled off, oil or grease all moving parts and bearings.
– Clean the chain. (
P. 69)
– Treat bare metal parts (except for brake discs and exhaust system) with anti-corrosion materials.
Cleaning and polishing materials for metal, rubber and plastic ( P. 169)
– Treat all painted parts with a mild paint polish.
High-luster polish for paint ( P. 169)
– To prevent electrical problems, treat electric contacts and switches with contact spray.
Contact spray ( P. 169)
– Oil the ignition/steering lock.
Universal oil spray ( P. 170)