Flashing code – KTM 690 ENDURO EU User Manual
Page 146
FLASHING CODE
144
11
FLASHING CODE
Fault
Description
Possible cause
Action
02
FI warning lamp (MIL) flashes
briefly 2x
Malfunction in ignition pulse
generator circuit
– Check the ignition pulse
generator.
x
06
FI warning lamp (MIL) flashes
briefly 6x
Input signal from throttle valve
sensor too low/high
– Check the throttle valve sen-
sor.
x
08
FI warning lamp (MIL) flashes
briefly 8x
Input signal from throttle grip
sensor too low/high
– Check the throttle grip sen-
sor.
x
09
FI warning lamp (MIL) flashes
briefly 9x
Input signal from pressure sen-
sor of induction manifold too
low/high
– Check the pressure sen-
sor of the induction mani-
fold.
x
12
FI warning lamp (MIL) flashes 1x
long, 2x short
Input signal from coolant tem-
perature sensor too low/high
– Check the temperature sen-
sor coolant.
x
13
FI warning lamp (MIL) flashes 1x
long, 3x short
Input signal from intake air
temperature sensor too low/high
– Check the intake air temper-
ature sensor.
x
14
FI warning lamp (MIL) flashes 1x
long, 4x short
Input signal from ambient air
pressure sensor too low/high
– Check the ambient air pres-
sure sensor.
x
15
FI warning lamp (MIL) flashes 1x
long, 5x short
Input signal from roll angle sen-
sor too low/high
– Check the roll angle sen-
sor.
x
17
FI warning lamp (MIL) flashes 1x
long, 7x short
Malfunction in lambda probe
circuit
– Check the lambda probe.
x
24
FI warning lamp (MIL) flashes 2x
long, 4x short
Malfunction in voltage supply
circuit of EFI control unit
– Check the EFI control unit
voltage supply.
x
25
FI warning lamp (MIL) flashes 2x
long, 5x short
Malfunction in side stand
switch circuit
– Check the side stand
switch.
x
26
FI warning lamp (MIL) flashes 2x
long, 6x short
Malfunction in Hall sensor
throttle valve control circuit
– Check the Hall sensor throt-
tle valve control.
x