KTM 690 ENDURO EU - Manual (Page 143)

TROUBLESHOOTING
141
10 TROUBLESHOOTING
Faults Possible cause Action
Engine does not turn when the electric
starter button is pressed Operating error – Carry out the instructions for starting.
( P. 43)
Battery discharged – Recharge the battery. x ( P. 105)
– Check the cause of discharging.
Fuse 1, 2, 3, or 4 blown – Change the fuses of individual power
consumers. ( P. 109)
Main fuse burned out – Change the main fuse. ( P. 107)
Ignition/steering lock or emergency OFF
switch defective – Have ignition/steering lock or emergency
OFF switch checked.
Defect in safety start system – Have the safety start system checked.
Engine turns only if the clutch lever is
drawn The vehicle is in gear – Shift gear to neutral.
The vehicle is in gear and the side stand is
folded out – Shift gear to neutral.
Defect in safety start system – Have the safety start system checked.
Engine turns although a gear is engaged Defect in safety start system – Have the safety start system checked.
Engine turns but does not start. Operating error – Carry out the instructions for starting.
( P. 43)
Fuse 4 blown – Change the fuses of individual power
consumers. ( P. 109)
Coupling of fuel hose connection not con-
nected – Reconnect coupling of fuel hose connec-
tion.
Socket connector of cable harness oxidized – Clean socket connector and treat it with
contact spray.
Defect in fuel injection system – Read the error memory with the KTM
diagnostics tool and correct the fault.
Engine has too little power. Air filter very dirty – Have the air filter changed.