Mounting oil filter x, Cleaning oil screens x, Mounting oil filter – KTM 690 ENDURO EU User Manual
Page 139: Cleaning oil screens, P. 137), Maintenance work on chassis and engine
MAINTENANCE WORK ON CHASSIS AND ENGINE
137
9.80
Mounting oil filter
x
100204-10
– Check parts for damage and wear. Replace damaged or worn parts.
– Insert oil filter
and
.
– Oil the O-rings of the oil filter cover. Refit the oil filter cover
and
.
– Mount and tighten screws.
Specification
Screw, oil filter cover
M5
6 Nm (4.4 lbf ft)
9.81
Cleaning oil screens
x
Warning
Danger of scalding Engine oil and gear oil get very hot when the motocycle is driven.
– Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under cold water immediately.
Warning
Environmental hazard Problem materials cause environmental damage.
– Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
– Place a suitable container under the engine.