Sierra Wireless RJ-11 - Manual (Page 50)

Rev 3.0 B 2/15/08 45
Figure 2-20: RJ-11 IP Gateway: Emailing Debug Information
The SMTP Server Information is the SMTP (mail host) you will
be using to send the debug information. You can usually find
the SMTP settings in the email client you use. Not all email
hosts will allow relaying through their host.
Commands
The RJ‐11 IP Gateway has some built in commands available.
Ping
You can use the Ping command to test a network connection.
Figure 2-21: Host RJ-11 IP Gateway:Ping
Enter the IP address to Ping or a Hostname and the Number of
Pings then press the Ping button. The command will display
the results as follows:
Sending 10 PINGs to 209.75.217.6...