Sierra Wireless RJ-11 User Manual
Page 39
Hardware
34
2120028
Figure 2-10: Host RJ-11 IP Gateway: IP Routing
If the device server is configured to use DHCP, it will try to get
IP configuration information from the DHCP server. You may
also manually set up static routes on this page.
Each IP route consists of a destination IP address, a netmask,
and a gateway IP address. Depending on the netmask, the
destination IP can specify one of two route types:
•
Host route: This is a route to a specific IP host. The
netmask is always 255.255.255.255.
•
Network route: This is a route to an IP network. The
netmask defines which portion of the destination IP
address contains the network number.