Hardware setup, Connectors and reset button – Sierra Wireless RJ-11 User Manual
Page 20
Rev 3.0 B 2/15/08
15
3: Hardware Setup
•
•
Designed for simplicity, the RJ‐11 IP Gateway hardware has
few complicated parts.
Connectors and Reset button
The Reset button is recessed. To reset the connection, using an
unbent paperclip or other narrow, blunt tip, press and quickly
release the reset button. To reset the configuration to the
factory default, press and hold the reset button until you see
the appropriate alternating light sequence.
Figure 3-1: Right side: RJ-45 connector, Power connector, and Reset button
(not to scale)
Figure 3-2: Left side: RJ-11(phone) connector (not to scale)
Warning:
The RJ-11 IP Gateway's RJ-11 phone
port should never be connected into the Public
Switched Telephone Network (PSTN). This device is
designed to emulate the PSTN for other devices.
Reset
RJ‐45 Ethernet
Power
RJ‐11