Sierra Wireless RJ-11 - Manual (Page 22)

Rev 3.0 B 2/15/08 17
Table 3-2: Status - Resetting the Configuration
Table 3-3: Status - Error Conditions
• ETHERNET ‐ Indicates the status of the Ethernet
connection (RJ‐45 port).
Table 3-4: Ethernet
• PHONE ‐ Indicates the status of the phone port (RJ‐11).
LED Condition Description
Alternating Green/
Red While the Reset button is held in, the status
light will begin to blink in this sequence to
indicate the RJ-11 IP Gateway will shortly
restore the factory default condition.
If you do not want to restore the factory
default, release the button before the
sequence changes to Green/Yellow.
Alternating Green/
Yellow While the Reset button is held in, the status
light will begin to blink in this sequence to
indicate the factory default configuration was
restored. Once the RJ-11 IP Gateway
indicates the configuration was restored, you
can release the reset button.
LED Condition Description
Alternating Green/Red A serious system error occurred. See the
system log for more details.
Alternating Green/
Yellow The current configuration is corrupt and
the factory default configuration is being
used
Solid Red The RJ-11 IP Gateway has encountered a
fatal error, contact technical support for
assistance.
LED Condition Description
Solid Green The Ethernet link is available and
idle.
Green/Yellow
Blinking Network traffic is detected.
Off The Ethernet link is unavailable.