Sierra Wireless RJ-11 - Manual (Page 28)

Rev 3.0 B 2/15/08 23
2: Web Interface
• Web-based Interface
• Network Configuration
• Security Settings
• Status and Logs
• System Log
• Commands
• Reset/Reboot
The RJ‐11 IP Gateway can be configured to handle a variety of
devices which need to connect to an RJ‐11 port.
Note: For configuration options for your Raven X, refer to the Raven
x’s user guide. All user guides are available on the Sierra Wireless
website: http://www.sierrawireless.com/support.
Web-based Interface
Note: Screen shots in this guide are using Microsoft Internet
Explorer, but you can use any web browser to configure the RJ-11 IP
Gateway.
The RJ‐11 IP Gateway employs a web‐based user interface. To
access the web interface, you will need to know the IP Address
given to your Raven‐E by the cellular carrier (or the modem
domain name if you have configured IP Manager settings for
the modem). Type the IP address (or modem domain name)
into the Address bar of your web browser followed by “:9080”
(see the example below).
Note: Since many cellular carriers block the standard web browser
ports (80 and 8080), the RJ-11 IP Gateway uses 9080 by default as a
port for the web-based interface.
Figure 2-1: Web Browser: Enter the Location