Sierra Wireless RJ-11 - Manual (Page 38)

Rev 3.0 B 2/15/08 33
Figure 2-9: RJ-11 IP Gateway: DNS Settings
If the device server is configured to use DHCP, it will try to get
DNS configuration information from the DHCP server. You
may also manually set up static DNS entries on this page.
Having DNS configured allows you to specify names in place
of IP addresses in your configuration.
The DNS Server IP Addresses are used to specify the addresses
of one or more machines that can be used to resolve names to
IP addresses.
The Static Hosts entries are used to define local host name to IP
address mappings.
IP Routing
The IP Routing page lets you configure network routes for
accessing remote networks.