Sun Microsystems FASTETHERNET 6U - Manual (Page 98)

80 Sun Quad FastEthernet 6U CompactPCI Adapter Installation and User’s Guide • June 2000
Using the SunVTS Diagnostic Software
The SunVTS software executes multiple diagnostic hardware tests from a single user
interface. It is used to verify the configuration and functionality of most hardware
controllers and devices. The SunVTS software operates primarily from a user
interface that enables you to set test parameters while diagnostic operations are
being performed.
The SunVTS nettest diagnostic can be used to test all of the networking interfaces
on the system, including the interfaces on the adapter.
To use the nettest diagnostic, you must have the SunVTS software installed on
your system. Refer to the Solaris on Sun Hardware Platform Guide for SunVTS
installation instructions.
Refer to the SunVTS documentation (listed in TABLE D-1 ) for instructions on how to
run and monitor the nettest diagnostic. These SunVTS documents are available on
the Solaris on Sun Hardware Collection, which is provided on the Solaris Supplement
CD for the Solaris release on your system.
TABLE D-1 SunVTS Documentation
Title Description
SunVTS User’s Guide Describes the SunVTS diagnostic environment
SunVTS Test Reference Manual Describes each SunVTS test (including the nettest )
and describes the various test options and
command-line arguments
SunVTS Quick Reference Provides an overview of the user interface