Sun Microsystems FASTETHERNET 6U - Manual (Page 105)

Index 87
ok prompt, 48, 81
test command, 82
viewing device path names, 43, 49
operation mode
full-duplex, 45
half-duplex, 45
operation specifications, 53
P
path_to_inst file, 42, 66, 73
PCI FastEthernet and expansion ASIC, 58, 60, 61
physical dimensions, 54
plumbing interfaces, 48, 78
power requirements, 56
powering off the server, 21, 36
powering on the server, 25, 38
product overview, 2
Q
qfe driver
adding an additional delay, 61
attaching
qfe interfaces, 42
autonegotiation, 71
defining current status, 60
forced mode, 70
interpacket gap parameters, 60
lance_mode , 61
maximum back-to-back packets, 63
operational mode parameters, 62
operational mode, priority, 62
reporting link partner capabilities, 64
reporting transceiver capabilities, 63
setting parameters using the
ndd utility, 65
setting parameters using the qfe.conf file, 72
qfe.conf file, 72
R
rear transition card, 8
connecting cables, 26
illustrated, 11
rear-access adapter
connecting cables, 26
Ethernet ports, 52
front card, 17
hot-swap LED, 19
illustrated, 2
installing, 7 to 25
cold-swap mode, 21
hot-swap mode, 10
selecting an I/O slot, 9
overview of installation, 5
preparing for installation, 8
removing, 76
replacing, 78
tools needed, 8
removing the adapter, 76
replacing the adapter, 78
RJ-45 connectors, 2, 52, 53, 58
S
self-test diagnostics, 81
setting
qfe driver parameters, 57, 65 to 74
in the qfe.conf file, 72
with the ndd utility, 65
ship kit contents, 8, 28
show-nets command output, 49, 82
software
adding an additional delay, 61
attaching
qfe devices, 42
autonegotiation, 45
interfaces
activating, 78
disabling, 76
lance_mode , 61
plumbing interfaces, 42, 48, 78
qfe driver parameters, 59
setting qfe driver parameters, 65
unplumbing interfaces, 47, 76
specifications
environmental, 55
performance, 53
physical dimensions, 54
power requirements, 56
SunVTS
diagnostics, 80
documentation, 80