beautypg.com

Connecting the cables to the frontaccess adapter, Connecting the cables to the front-access adapter – Sun Microsystems FASTETHERNET 6U User Manual

Page 58

background image

40

Sun Quad FastEthernet 6U CompactPCI Adapter Installation and User’s Guide • June 2000

Connecting the Cables to the
Front-Access Adapter

After installing the adapter, you can attach the Ethernet cables to the adapter’s
connectors.

▼

To Connect the Cables to the Front-Access
Ethernet Ports

1. Locate the adapter that you installed in the system.

2. Connect one end of an Ethernet cable to an Ethernet port on the adapter (see

FIGURE 3-9

).

FIGURE 3-9

Connecting Ethernet Cables to the Front-Access Adapter

3. Connect the other end of the Ethernet cable to an active Ethernet network.

Repeat Steps 2 and 3 for each Ethernet cable you need to connect.

Ethernet cable

See also other documents in the category Sun Microsystems Hardware: