Siemens 1800C - Manual (Page 99)

P R I N T I N G R E P O R T S 11 - 2
2
Press to choose an interval,
and then press Menu/Set.
(If you choose 7 days, the LCD prompts you to choose the day at which to begin
the 7-day countdown.)
3
Enter the time to begin printing in 24-hour format, and then press Menu/Set.
(For example: enter 19:45 for 7:45 PM.)
4
Press Stop/Exit.
Using the Reports Key
Five reports are available:
Prints the Help List so you can see at-a-glance
how to quickly program every menu selection.
Lists names and numbers stored in One Touch
and Speed Dial memory, in numerical order.
Lists information about the last 200 incoming
and outgoing faxes. TX means Transmit; RX
means Receive.
Prints a Transmission Verification Report for
your last transmission.
Lists settings for GENERAL SETUP ,
SETUP RECEIVE , SETUP SEND , SETUP
REPORTS , and TEL SERVICE . The settings
for REMOTE FAX OPT are included.
To Print a Report
1
Press Reports while holding down Shift.
2
Press to select the report you want, and then press Menu/Set.
—OR—
Enter the number of the report you want to print. For example, press 1 to print
the Help List.
INTERVAL:OFF or
1.HELP LIST
2.AUTO DIAL
3.FAX ACTIVITY
4.TRANSMISSION
5.USER SETTINGS
or