Siemens 1800C - Manual (Page 60)

5 - 7 I N I T I A L S E T U P
2
If none of the users are hearing-impaired,
press to select VOL AMPLIFY:OFF? , and then press Menu/Set and go
to Step 4—OR—
If some or all of the users are hearing-impaired, select
VOL AMPLIFY:ON? ,
and then press Menu/Set.
3
If all the users are hearing-impaired,
press to select PERMANENT? ,
and then press Menu/Set—OR—
If only some of the users are hearing-impaired, select
TEMPORARY? , and
then press Menu/Set.
4
Press Stop/Exit.
Turning On Automatic Daylight Savings Time
You can set the machine to change automatically for Daylight Savings Time. It
will reset itself forward one hour in the Spring and backward one hour in the
Fall.
1
Press Menu/Set, 1, 6.
2
Press to select ON (or OFF ), and then press Menu/Set.
3
Press Stop/Exit.
Setting Tone/Pulse Dialing Mode
Your fax machine comes set to accommodate tone dialing service
(multi-frequency). If you have pulse dialing service (rotary), you need to change
the dialing mode.
1
Press Menu/Set, 1, 7.
2
Press to select PULSE (or TONE ), and then press Menu/Set.
3
Press Stop/Exit.
Memory Storage
In the event of a power failure, all settings in the GENERAL SETUP , SETUP
RECEIVE , SET AUTO DIAL , SETUP REPORTS , REMOTE FAX OPT ,
COPY , plus the COVERPG SETUP and COVERPAGE MSG settings (from
SETUP SEND ) are stored permanently. You may have to reset the date and
time.
VOL AMPLIFY:ON?
or
PERMANENT?
TEMPORARY?
or
6.AUTO DAYLIGHT
or
7.TONE/PULSE
or