Siemens 1800C - Manual (Page 79)

A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S 8 - 1
8
8
Auto Dial Numbers
and Dialing Options
Storing Numbers for Easy Dialing
You can set up your fax machine to do three types of easy dialing: One Touch,
Speed Dial and Groups for Broadcasting faxes.
Storing One Touch Dial Numbers
You can store 12 fax/telephone numbers that
you can dial by pressing one key (and
Black Fax Start). To access numbers 7 to
12, hold down Shift. When you press a One
Touch dial location, the LCD shows the
name or number as the call is dialed.
(See
One Touch Dialing , page 8-5.)
One Touch keys are the 6 keys (numbers 7 to 12) located to the left of the dial pad.
1
Press Menu/Set, 2, 3, 1.
2
Press the One Touch key where you want to store a number.
The LCD shows the location you selected.
3
Enter a number (up to 20 digits), and then press Menu/Set. If you want to enter
a pause in the dialing sequence (for example, to wait for an “outside line”), press
Redial/Pause as you’re entering digits. A dash appears on the LCD. Pressing
Redial/Pause enters a 3.5 second pause when the number is dialed.
4
Use the dial pad to then enter the name
(up to 15 characters), and then press
Menu/Set. You can use the chart on
page 5-3 to help you enter letters—OR—To store the number without a name,
press Menu/Set.
5
Return to Step 2 to store another One Touch number—OR—Press Stop/Exit.
When you dial an auto dial number, the LCD shows the name you’ve stored, or,
if you haven’t stored a name, the number you’ve stored.
If you loose electrical power, auto dial numbers in memory will not be lost.
(For USA only) One Touch key 1 has been pre-programmed for the Brother
fax-back system. One Touch key 2 has been pre-programmed for the
CallManage long distance plan. You can override them if you wish.
Note
If you need to store a pause longer than 3.5 seconds, press Redial/Pause two
or more times.
1.ONE-TOUCH DIAL
NAME: