Siemens 1800C - Manual (Page 55)

I N I T I A L S E T U P 5 - 2
Setting Date and Time
Your fax machine displays the date and time, and prints it on every fax you send.
In the event of a power failure, you may have to reset the date and time. All other
settings remain unaffected.
1
Press Menu/Set, 1, 3.
2
Enter the last two digits of the year,
and then press Menu/Set.
3
Enter two digits for the month (for
example, enter 09 for September, or 10
for October), and then press Menu/Set.
4
Enter two digits for the day (for example,
06), and then press Menu/Set.
5
Enter the time in 24-hour format (for
example, enter 15:25 for 3:25 P.M.),
and then press Menu/Set.
6
Press Stop/Exit.
The LCD now displays the date and time you set whenever the fax machine is
in Standby mode.
Setting Station ID
You can store your name, fax number and telephone number in this setting. The
name and fax number will be printed on the fax cover pages and all fax pages
that you send.
1
Press Menu/Set, 1, 4.
2
Enter your fax number (up to 20 digits),
and then press Menu/Set.
You must enter a fax number to proceed.
3
Enter your telephone number (up to 20
digits) and press Menu/Set. If your
telephone number and fax number are the
same, enter the same number again.
4
Use the dial pad to enter your name (up to
20 characters), and then press
Menu/Set. (See
Entering Text , page 5-3.)
5
Press Stop/Exit.
The LCD returns to the date and time.
The telephone number you enter is used only for Cover Page features.
(See
Composing Electronic Cover Page , page 7-7.)
If your Station ID has already been programmed, the LCD prompts 1 to make
a change, or 2 to exit without changing.
3.DATE/TIME
YEAR:XX
MONTH:XX
DAY:XX
TIME:XX:XX
4.STATION ID
FAX:
TEL:
NAME: