Siemens 1800C - Manual (Page 83)

A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S 8 - 5
One Touch Dialing
1
Pick up the handset—OR—Press Hook/Hold.
2
When you hear a dial tone, press the One Touch key of the location you want to
call. (See
Storing One Touch Dial Numbers , page 8-1.)
3
If you pressed Hook/Hold to dial the call, pick up the handset when the other
party answers. (The speaker works only one way; the other party won’t be able
to hear you unless you pickup the handset.)
4
To hang up, replace the handset.
Speed Dialing
1
Pick up the handset—OR—Press Hook/Hold.
(See
Storing Speed Dial Numbers , page 8-2.)
2
When you hear a dial tone, press Search/Speed Dial, and then press # then
the two-digit Speed Dial number.
3
If you pressed Hook/Hold to dial the call, pick up the handset when the other
party answers. (The speaker works only one way; the other party won’t be able
to hear you unless you pickup the handset.)
4
To hang up, replace the handset.
Note
To dial One Touch numbers 6 to 12, hold down Shift as you press the One
Touch key.
If you try to use a One Touch location with no number stored in it, you’ll hear
a warning sound, and screen will display
NOT REGISTERED . The display
will return to normal after 2 seconds.
Note
If you are sending a fax, press Black Fax Start after pressing the One Touch
key. If you picked up the handset, press Black Fax Start when the receiving
fax machine answers with fax tones.
If you are sending a fax, press Black Fax Start after pressing the Speed Dial
number. If you picked up the handset, press Black Fax Start when the
receiving fax machine answers with fax tones.