Sharp UX-470 User Manual
Page 96
4
Press the STOP key to return to the
date and time display.
STOP
♦
Set Option Setting 3 (Number of Rings to Answer) to 2 or more
rings (see Chapter 8).
How Caller ID operates
When you receive a call, the name and/or phone number of the caller
will alternately appear in the display, beginning just before the second
ring. The information will continue to be displayed until you pick up
the handset, or until the fax answers automatically if it is in FAX
mode.
Note: At present most caller-id equipped telephone networks only
supply the caller’s number, therefore the caller’s name will only
appear providing that the caller’s name and number have been
programmed into memory.
Display example:
DOE JOHN
444-555-6666
Caller’s name
Caller’s number
Display messages
One of the following messages will appear while the fax rings if caller
information is not available.
NO SERVICE
No caller information was received from your
telephone company. Make sure that the telephone
company has activated your service.
CALLER-ID
ERROR
Noise on the telephone line prevented reception
of caller information.
WITHHELD
Caller information was not provided by the
telephone company at the caller’s request.
Caller ID
94