Sharp UX-470 - Manual (Page 124)

♦
If Option Setting 17 (Auto Print Out) is set to YES, a report will
be automatically printed out whenever information on 30
operations has accumulated. (A report can still be printed on
demand at any time.)
♦
All information is erased after a report is printed out. If automatic
print-out is disabled and print-out has not been performed
manually for 30 operations, the information on the oldest
operation will be overwritten each time a new operation is
performed.
Explanation of headings
SENDER/
RECEIVER The fax number of the other machine involved in the transaction. In the case
of a transmission, the number dialled appears. In the case of a reception, the
programmed ID of the sending machine appears. If this machine does not
have an ID function, the communication mode will appear (for example,
"G3").
PAGES Number of pages transmitted or received.
NOTE OK - Transmission/reception was normal.
P.FAIL - A power failure occurred. If you have power and the problem
persists, try a different outlet. If necessary, have an electrician check your
power lines.
JAM - A problem with the paper or original document occurred. Make sure
the paper or document is loaded properly. Make sure the operation panel is
shut securely.
NO PAPER - You ran out of paper during reception.
Printing Reports and Lists
122