Sharp UX-470 - Manual (Page 92)

Comments:
••
While the handset of the fax is lifted (off hook), an extension phone
connected directly to the fax cannot be used to speak with the other party.
••
The fax may interrupt a voice call received on an extension phone if the
reception mode is set to A.M. and there is a period of silence during the
conversation. If you are on a tone dial phone, you can prevent this by
pressing any three keys on the phone immediately after you answer. (Note:
Do not enter the code to activate fax reception: 5,
*, *.)
Chain Dialling
After lifting the handset, you can dial any combination of Normal
Dialling, Rapid Key Dialling and Speed Dialling numbers. For
example, if you have stored an area code or an access code for a
special service in a Rapid Key, you can press the Rapid Key for that
area code or access code, then dial the remainder of the number by
pressing a Rapid Key, pressing number keys, or pressing the SPEED
DIAL key and entering a two-digit Speed Dial number.
Using the SEARCH/R key
You can use the SEARCH/R key to search for a Rapid Key or Speed
Dial number. First search for the number as described in Using the
SEARCH/R key in Sending a Fax by Automatic Dialling in Chapter 3,
then pick up the handset or press the SPEAKER key. The number
will be dialled automatically (do not press the START/MEMORY
key).
Redial
The last number called can be redialled by pressing the REDIAL key
(it is not necessary to pick up the handset or press the SPEAKER
key). When the other party answers, pick up the handset to talk.
Making Telephone Calls
90