Sharp UX-470 User Manual

Page 43

Erasing received messages

It is important to erase received messages after you listen to them to
ensure that the memory does not become full.

••

Erasing all messages: To erase all
messages, press and hold down the
DELETE key for at least 2 seconds.

••

Erasing a single message: To erase
only a single message, press the
DELETE key while the message is
being played.

Recording Memos and Telephone Conversations

You can use the REC/MEMO key to record telephone conversations
and messages for other users of the UX-470. These will be played
back together with any incoming messages when the PLAY/SKIP key
is pressed.

••

Recording messages: To record a
message, hold down the
REC/MEMO key and speak facing
the "MIC" mark on the lower left
corner of the machine at a distance
of about 20 to 30 cm. When you
have finished speaking, release the
STOP key.

••

Recording phone conversations:
To record a phone conversation,
hold down the REC/MEMO key
during the conversation you want to
record (while recording, you will
hear a beep every 15 seconds).
When you are finished, release the
key.

DELETE

REC/MEMO

ine

Operating the Answering Machine