Sharp UX-470 - Manual (Page 76)

Speed Dialling
Speed Dialling can be used to dial any number that has been stored for
Automatic Dialling.
1
Load the document(s).
The display will show:
READY TO SEND
••
Set the resolution and/or contrast if
desired.
RESOLUTION
2
Press the SPEED DIAL key and then
enter the two digits of the Speed Dial
number by pressing the number keys.
••
To enter numbers 1 through 9, first
enter 0 and then the number.
SPEED DIAL
2 0
(Example)
3
Check the display. If the name or
number shown is correct, press the
START/MEMORY key. (If not,
press the STOP key and then repeat
Step 2.)
START/MEMORY
Sending a Fax by Automatic Dialling
74