Sharp UX-470 - Manual (Page 77)

Direct Keypad Dialling
You can also enter a full number with the number keys and then press
the START/MEMORY key to begin dialling. You can use this
method to dial a full number when you don’t need to speak to the
other party before faxing.
1
Load the document(s).
The display will show:
READY TO SEND
••
Set the resolution and/or contrast if
desired. RESOLUTION
2
Enter the number of the receiving
machine by pressing the numeric keys.
••
If a pause is required between any
of the digits to access a special
service or an outside line, press the
REDIAL key. The pause will
appear as a hyphen. Several pauses
can be entered in a row.
2
5
8
GHI JKL MNO
TUV WXYZ PQRS
ABC DEF
1
4
7
3
6
9
3
Check the display. If the number of the
receiving machine shown is correct,
press the START/MEMORY key.
••
If it is not correct, press the STOP
key to backspace and clear one digit
at a time, and then re-enter the
correct digit(s).
START/MEMORY
3.
S
end
in
g
D
o
cu
m
ent
s
Sending a Fax by Automatic Dialling
75