Sharp UX-470 - Manual (Page 39)

3
Press the START/MEMORY key.
4
Press 1 to select GENERAL. (If you
are recording a message for the
Transfer function explained later in
this chapter, press 2 for TRANSFER.)
START/MEMORY
GENERAL TRANSFER
1 2 or
5
Press the REC/MEMO key, and then
speak facing the "MIC" mark on the
lower left corner of the machine at a
distance of about 30 cm.
••
The outgoing message can be up to
60 seconds long. The outgoing
message for the Transfer function
can be up to 15 seconds long.
••
While recording, the display will
show the time remaining to record.
6
When finished, press the STOP key.
••
If your message exceeds the time
limit or more than 6 seconds of
silence is detected, recording will
stop automatically.
STOP
7
Press the STOP key twice to return to
the date and time display.
STOP STOP
REC/MEMO
Recording an Outgoing Message
37