Sharp UX-470 - Manual (Page 67)

Resolution and Contrast
If desired, you can adjust the resolution and contrast before sending a
document.
The default resolution
setting is STANDARD
and the default
contrast setting is
AUTO.
You must adjust the
settings each time
you don’t want to use
the default settings.
Note: The resolution and contrast settings are only effective for
transmitting and copying a document. They are not effective for receiving
a document.
Resolution settings
STANDARD: Use STANDARD for ordinary documents. This
setting gives you the fastest and most economical
transmission.
FINE: Use FINE for documents containing small letters
or fine drawings.
SUPER FINE: Use SUPER FINE for documents containing very
small letters or very fine drawings.
HALF TONE: Use HALF TONE for photographs and
illustrations. The original will be reproduced in 64
shades of grey.
Contrast settings
AUTO Use AUTO for normal documents.
DARK Use DARK for faint documents.
3.
S
end
in
g
D
o
cu
m
ent
s
Resolution and Contrast
65