Sharp UX-470 - Manual (Page 111)

Polling (Requesting a Fax Transmission)
Polling allows you to call another fax machine and have it send a
document (previously loaded in its feeder) to your machine without
operator assistance. In other words, the receiving fax machine, not the
transmitting fax machine, initiates the transmission. You can use your
machine to both poll and be polled by others.
To use the polling function, you must first set Rapid Key 05/POLL for
use as a polling key. This is done by changing Option Setting 14, as
described in Chapter 8, Option Settings. (Note that when Rapid Key
05/POLL is set as a polling key, it cannot be used for Rapid Key
Dialling.)
Requesting transmission
Note: Rapid Dial Keys cannot be used for polling. To dial a Rapid Dial
location, press the SPEED DIAL key and then enter the 2-digit number
corresponding to the Rapid Key.
1
Dial the fax machine you want to poll
using one of the following methods:
••
Pick up the handset (or press the
SPEAKER key) and dial the full
number. Wait for the fax
answerback tone.
••
Press the SPEED DIAL key and
enter a 2-digit Speed Dial number.
••
Enter the full number using the
numeric keys.
(Example)
2
Press Rapid Key 05/POLL.
••
If you used the handset, replace it
when POLLING appears in the
display. Reception will begin.
05/POLL
2
5
8
GHI JKL MNO
TUV WXYZ PQRS
ABC DEF
1
4
7
3
6
9
7.
S
p
eci
a
l
Func
ti
on
s
Polling (Requesting a Fax Transmission)
109