Sharp UX-470 - Manual (Page 73)

6
Enter the name of the party by pressing the number keys as shown in
the chart below. Up to 20 characters can be entered.
••
If you don’t want to enter a name, skip this step.
••
To enter two letters in succession that require the same key, press
the SPEAKER key after entering the first letter to advance the
cursor.
Example: SHARP = 7 7 7 7 7 4 4 4 2 2 7 7 7 7 7 7
7
Press the START/MEMORY key.
8
Return to Step 3 to store another number, or press STOP to exit. If
the number will be used for Rapid Key Dialling, you can write the
name on the appropriate Rapid Key label.
Step 3 or
START/MEMORY
STOP
Note: Numbers stored for automatic dialling will appear on the
"Telephone Number List" printout, so this facility should not be used
to store least cost routing or system access passwords which need to
remain private.
Note: To confirm that Automatic Dialling numbers have been stored
correctly, print out the Telephone List. The procedure for doing this is
explained in Chapter 9, Printing out Reports and Lists.
SPEAKER
A =
B =
C =
D =
E =
F =
G =
H =
I =
J =
K =
L =
M =
N =
O =
P =
Q =
R =
S =
T =
U =
V =
W =
X =
Y =
Z =
SPACE =
3.
S
end
in
g
D
o
cu
m
ent
s
Sending a Fax by Automatic Dialling
71