Siemens SX1 - Manual (Page 80)

Setup
79
SX1 K1 en, A31008-H6500-A1-3-7619 (13. June 2003, 12:16)
© Siemens AG 2001, O:\Mobil\SX1_(K1)\en\k1gb_setup.fm
Sending via Bluetooth™
To send an item via Bluetooth™, you
must first select it in its application.
Then:
OptionsKSendKVia Bluetooth™
Your phone starts to search for other
Bluetooth™ devices. All found part-
ners are shown on the display with a
device icon, their Bluetooth™ name
and the device type. Trusted part-
ners are indicated by an icon .
Select the partner you want to con-
nect with.
B Press Select . The item you
want to send is copied to
the Outbox.
Connecting is shown.
M
If "Pairing" is required by
the other device, you
must enter a password.
Create your own pass-
word for this (1-16 chars,
numeric) and give it to
the partner, for its unique
use. Subsequently this de-
vice is trusted.
Now the connection
should be established.
Sending data shown.
After the message has
been sent, the Bluetooth™
connection will be ended
automatically.
Note
When searching for other Bluetooth™
devices, you may see only their unique
Bluetooth™ addresses (when no name
was given). To see your unique address,
enter in standby mode: *#2820#
Note
An existing list of devices may appear, if
you have already searched for other devic-
es. In this case select More devices .
Icons for devices are:
Computer
Phone
Car Kit
headset
Other
Unknown
Stop Press to interrupt search and
work with devices already
found.
Note
If sending fails, the message will be deleted
from the Outbox .
Data received via Bluetooth™ are stored in
the Inbox , p. 30.
Status icons:
Bluetooth ™ active.
Connection is active.